Vibration & Shock Technologies

Transportation Simulators

VST Transportation Simulators  are vibration tables that duplicate of the destructive shock and vibrations incurred during product shipment.  We offer a 1 inch circular synchronous motion (which is standard in the packaging industry), as well as vertical linear and a non-synchronous circular motion.  The non-synchronous motion is the most violent as it introduces a intermittent tipping action.

VST Transportation Shakers are also excellent for burn-in testing to help eliminate premature product failure caused by packaging techniques. SAVE MONEY and burn-in your products prior to shipment.

Transportation Shakers have been designed to meet all the package testing parameters outlined in MIL-STD-810, ASTM D4169, International Safe Transit Association (ISTA) Specification, Federal Test Method No. 101 and MIL-STD-331.



Ts4000

Model #
Payload Motion Options Table Table Table Power Requirements 50/60Hz
TS100 100 lbs
VL NS OP30

36" x 36" 42" x 42" 208-240 VAC 20 Amp Circuit 1PH/3PH
TS300 300 lbs
VL NS OP30
36" x 36" 42" x 42" 208-240 VAC 20 Amp Circuit 1PH/3PH
TS500 500 lbs
VL NS OP30
36" x 36" 42" x 42" 208-240 VAC 20 Amp Circuit 1PH/3PH
TS2000 2000 lbs
VL NS OP30 60" x 60" 72" x 72" 208-480 VAC 20 Amp Circuit 3PH
TS4000 4000 lbs
VL NS OP30 48" x 48" 60" x 60" 72" x 72" 380-480VAC 20 Amp Circuit 3PH
TS6000 6000 lbs
VL NS OP30
60" x 60" 72" x 72" 380-480VAC 20 Amp Circuit 3PH
TS8000 8000 lbs
VL NS OP30 60" x 60" 72" x 72" 96" x 96" 380-480VAC 20 Amp Circuit 3PH
TS10000
10000 lbs VL NS OP30 96" x 96" 96" x 120" 120" x 120" 380-480VAC 20 Amp Circuit 3PH


Motion Options: VL=Vertical Linear NS = Non Synchronous OP30 = 30Deg. Out of Phase
Example Model Number: TS100VL3636 Transportation Simulator-100 lbs payload -Vertical Linear motion 36" x 36" Table
All Transportation Simulators are controlled using a All-In-One Touchscreen Computer with VST Transportation Simulator Control software.


 

 

 

 

 



Package Drop Testers

VST Drop Testers are available to simulate the impact a package would encounter during handling and shipment. The automated machines is air actuated to provide a reliable long life. Drop height ranges from 6-72 inches. The Drop Tester is supplied with a variety of standard features to earn its reputation as the industry standard, The machines are designed to drop vertical one inch prior to drop arm swing to insure that package is not subject to rotation. Our drop testers are designed so packages may be released from any angle and be assured of landing in the same position. Special fixtures are standard to allow for corner and edge drops.

Manual models require no power or air facilities, the mechanism is spring actuated and the geometry requires little effort to reset the arm to the loaded drop position. The drop height is infinity adjustable and references a scale to set drop height.


Package Drop Tester Picture Blur

100 lbs models and up utilize a touch screen control to set drop height and drop release.

250 lbs models and up utilize a hydraulic lift system.

Please Contact Us if there's something you'd like a quote on or an application you'd like to discuss. Twitter